wp_flash_img_show will display here (config: default)
Drills / Routers


PCB Straight Type Drills
 
DRILLS & ROUTERS
 
A) Multilayer Drills

 

Product Diameter Range (mm) Solid Carbide Composite Brazed Application
Ultra Micro Drills 0.050 – 0.090 65840* 67840 66840 Drilling small holes, via holes and Foils & inner layers.
Super Micro Drills 0.10 – 0.19 65840* 67840 66840 Drilling small holes and via holes.
Main Range Drills 0.20 – 1.15 65840* 67840 66840 Drilling high layers boards, thick panels and flexible boards.

 

B) Standard Drills

 

Product Diameter Range(mm) Solid Carbide Composite Brazed Application
Micro Drills 0.20 – 0.65 65835* 67835 Drilling small PTH holes in DS and 4-6 layers boards.
Main Range Drills 0.70 – 3.175 65835* 67835 66835 Drilling in all standard PCB’s.
Inverse Drills 3.20 – 7.50 65835 Drilling in all standard PCB’s.
High Performance Inverse Drills 2.60 – 7.50 65534 High performance drilling in all standard PCB’s and high Tg boards for better registration.
High Performance Inverse Chip Breaker Drills 2.60 – 7.50 65532 High performance drilling in all standard PCB’s and high Tg boards for better registration and efficient chip removal.

 

PCB Undercut Drills

Spade Type

 

Product Diameter Range(mm) Solid Carbide Composite Brazed Application
Multilayer Drills (TW) 0.15 – 0.65 65610* 67610 66610 Drilling of high Cu content laminates to improve breakage of tools.
Multilayer Drills (VW) 0.15 – 0.65 65620* 67620 66620 Drilling of high layer boards, thick panels , High Tg and High Cu content laminates.
Multilayer Drills (HH) 0.15 – 0.45 65645* 67645 66645 High performance drilling in high stacks, BT and BGA application.
Undercut Drills (Standard Geometry) 0.20 – 2.50 65635* 67635 66635 Drilling of high layer boards and High Tg laminates.

 

Other PCB Drills

 

Product Diameter Range(mm) Solid Carbide Composite Brazed Application
Slot Drills 0.30 – 3.175 65546* 67546  

66546

Drilling PTH slots in all standard PCB’s.
Micro Via Drills 0.075 – 0.20 65550* 67550 66550 Drilling micro via and blind holes.
Micro Via Taper Drills 0.075 – 0.40 65551*  

67551

66551 Drilling micro via and blind holes.
Chamfering Cutter / Countersunk 6.00/6.35
60°/75°/90°/120°/140°
70681 Making counter chamfer on supporting holes.

 

PCB Routers

 
V GROOV CUTTERS
 

Product Diameter Range(mm) Article Application
Diacut Routers
RH Helix RH Cut
0.80 – 3.175 90626 FT
Updraft
Routing of all standard PCB’s.
Diacut Routers
LH Helix RH Cut
0.80 – 3.175 90627* FT
Downdraft
Routing of all standard PCB’s.
HI-Feed Diacut Routers
RH Helix RH Cut
0.60 – 3.175 90660 FT
Updraft
Routing of PCB’s with aggressive feed rates with rugged spindles.
Diacut Routers
RH Helix RH Cut
0.60 – 3.175 90661* DP
Updraft
Routing of all standard PCB’s with less deflection.
Chip-Breaker Routers
RH Helix RH Cut
0.50 – 3.175 90726 FT
Updraft
Routing of PCB’s with better edge finish under efficient vacuum conditions.
Chip-Breaker Routers
LH Helix RH Cut
0.50 – 3.175 90727* FT
Downdraft
Routing of PCB’s with better edge finish under efficient vacuum conditions and less deflection.
Chip-Breaker Routers
RH Helix RH Cut
0.50 – 3.175 90729* DP Updraft Routing of PCB’s with better edge finish and routing inner contours with less deflection.
High Performance ChipBreaker Routers
RH Helix RH Cut
0.40 – 3.175 90732 FT
Updraft
Routing of inner slots and complex contours in PCB’s.
Single Flute Routers
RH Helix RH Cut
0.40 – 3.175 92926 SE
90920* DP
Updraft
Routing Al, Cu heat sinks and flexible boards and teflon.
Two Flute Routers
RH Helix RH Cut
0.25 – 3.175 90826 FT
90820* SE
Updraft
Routing Al, Cu heat sinks and flexible boards and teflon.
Two Flute Routers
LH Helix RH Cut
0.60 – 2.40 90827* FT
Downdraft
Routing of soft material PCB.
Two Flute Routers SE
LH Helix LH Cut
1.00 – 2.40 90823* SE
Updraft
Routing of soft material PCB.
Three Flute Routers
RH Helix RH Cut
0.60 – 3.175 90436 FT
Updraft
Routing Al, Cu, Brass, Plastics.
Pin Routers 2.00 / 2.40 / 3.175 90628 FT
Downdraft
For manual feed routing machines.
V-Groove Routers 30°/45°/60°/90° 90846 Routers for v-scoring PCBs and routing isolation paths in proto-type
V-Groove Routers Helical type 30°/45°/60°/90° 90845* For V-scoring PCB’s and routing isolation paths in prototypes.

Copyright 2013 D. D. Enterprises. All Rights Reserved.web design by webclincher.com